Deburring & Finishing — Instant Online Quotes
Sharp edges gone, surfaces ready. Edge breaking, sanding, polishing, and prep for paint or powder coat — on laser-cut, machined, or welded parts.
⚔ Get a Finishing Quote →Finishing Capabilities
| Capability | Detail | Typical Use |
|---|---|---|
| Edge breaking | Deburr and radius edges on laser-cut parts | Safe handling, paint adhesion |
| Sanding / blending | Weld seam blending, scratch removal | Pre-paint prep |
| Polishing | To satin or mirror on stainless and aluminum | Food equipment, architectural |
| Surface prep | Degrease, scuff, profile | Ready for powder coat or paint |
What Finishing Costs
Finishing is priced by the piece or by the hour depending on the job:
- Edge break on laser-cut parts: $0.50–$3 per part depending on perimeter and material
- Sanding / blending: $45–$75/hr of skilled labour
- Polishing: $55–$90/hr depending on finish target
- Setup: $30 flat
Add finishing to your laser or machining quote and the AI prices the whole job at once.
Finish Is a Feature
Burrs cut fingers and tear gloves; rough edges reject paint; un-blended welds look unfinished. For a few dollars per part, finishing turns a 'shop part' into a 'product part'.
Frequently Asked Questions
Do you deburr laser-cut parts?
Yes — it's one of our most common add-ons. Edge break everything or just the edges that matter; we quote from the drawing.
Can you match a specific finish?
Satin, mirror, brushed, or spec'd Ra — tell us the target and we'll quote it.
Do you prep parts for powder coating?
Yes — degrease, scuff, and profile so the coating adheres properly. See Powder Coat / Paint.
Is there a minimum?
No minimum on finishing — single parts welcome.
Sharp Edges Need Attention?
Upload your file and get a real finishing quote — priced in minutes, confirmed by the shop.
⚔ Get a Finishing Quote →