CNC Turning — Instant Online Quotes
Shafts, pins, bushings, fittings, and threaded parts turned from bar stock. Upload your model and get a real price in minutes.
⚔ Get a CNC Turning Quote →CNC Turning Capabilities
Our machining division runs CNC lathes for diameters and lengths common across Ontario manufacturing.
| Capability | Detail | Typical Tolerance |
|---|---|---|
| Bar diameter | Up to 2 inches (larger by arrangement) | — |
| Turning length | Up to 12 inches between centers | — |
| Threads | UNF, UNC, metric — internal and external | ±0.002" |
| OD/ID finish | As-machined to 32 Ra, finer available | 32 Ra standard |
Materials We Turn
| Material | Typical Grades | Common Uses |
|---|---|---|
| Steel | 12L14, 1018, 4140, 8620 | Shafts, pins, hydraulic parts |
| Stainless | 303, 304, 316 | Fittings, food and marine hardware |
| Aluminum | 6061-T6, 2024 | Lightweight shafts, spacers |
| Brass | 360 free-machining | Fittings, valves, electrical |
| Plastics | Delrin, Nylon, PTFE | Bushings, rollers, insulators |
What CNC Turning Costs
Turning is quoted by the hour plus material. Typical Ontario job-shop rates for CNC turning run $85–$115/hr — your exact rate is confirmed on your quote.
- Material: Bar stock weight × rate/lb × 1.30 markup
- Machine time: Estimated from diameter, length, feature count, and thread requirements
- Setup: $30 flat per job
- Typical range: Simple bushing $20–50 each. Shafts $40–150 each. Production runs drop per-piece cost fast.
Upload your model and see a price in minutes.
Turned Parts That Show Up Done
A turned part is rarely the whole job. We add milling, keyways, heat treatment coordination, plating, and assembly — one quote covers the complete part, not just the lathe operation.
Frequently Asked Questions
Can you turn parts from customer-supplied material?
Yes — if you have your own bar stock, tell us in the quote notes and we'll price the machine time only.
What tolerances can you hold on turned parts?
Standard is ±0.002" on diameters. Press-fit and bearing fits are held tighter where the drawing calls for it.
Do you thread parts in-house?
Yes — internal and external threading, both imperial and metric, single-point or with dies as the geometry dictates.
Is there a minimum order?
No. One-off shafts and bushings are quoted the same as production runs.
Need a Turned Part?
Upload your drawing and get a real turning quote — AI-analyzed geometry, machinist-confirmed pricing.
⚔ Get a CNC Turning Quote →