Cut to Length — Instant Online Quotes
Bar, tube, angle, channel, and plate cut to exact length — with deburred ends and, if you need it, machined. Upload your cutting list for a real price in minutes.
⚔ Get a Cut-to-Length Quote →Cutting Capabilities
| Material | Sizes | Notes |
|---|---|---|
| Bar stock | Round, square, hex — to 4" diameter | Saw cut or machined |
| Tube & pipe | To 4" OD | Square, round, rectangular |
| Angle, channel, flat bar | Structural shapes | Cut and deburred |
| Plate | To 1/4" in-house, thicker via partner | Laser or saw |
What Cut-to-Length Costs
Saw cutting is one of the cheapest operations in the shop:
- Per cut: $2–$8 depending on size and material
- Minimum: $30 flat covers a typical cutting list
- Deburr: $0.50–$1.50 per end where specified
- Typical range: 20 pieces of 1" bar cut to 12": about $40–60 total
Upload your cutting list (or a drawing with lengths) and the AI counts the cuts.
Cut List Plus Machining
Cut-to-length is usually the first step of a bigger job: cut, face, thread, or drill the ends. We quote the full path — your parts arrive ready to use, not as raw material to figure out.
Frequently Asked Questions
Can I send just a cutting list?
Yes — a simple list of material, size, and lengths is enough. Our AI counts cuts and quotes it in minutes.
Do you cut customer-supplied material?
Yes — send material and the cutting list, and we'll quote the cutting labour only.
Do you deburr the cut ends?
Yes, when specified. Deburred ends are safer and ready for assembly.
What tolerances do you hold?
Saw cuts are typically ±1/16"; machined lengths hold ±0.005".
Need Material Cut to Length?
Upload your cutting list and get a real quote — priced in minutes, confirmed by the shop.
⚔ Get a Cut-to-Length Quote →